CY Scientific · China
Thin film coaters
Spin coaters, dip coaters and doctor-blade film coaters for thin-film, solar-cell and battery-electrode research.
- Category
- Surface and Thin-Film Science
- Manufacturer
- CY Scientific
- Country of origin
- China
- Models listed
- 11
Models
11 models and their specifications
018-inch Heated Anti-Corrosion Spin Coater
This product is a spin coater or spin processor, which uses centrifugal force generated by high-speed rotationto coatfilm materials.
- Fax: +86 371 8603 6875
- Add: No. 820, 8th Floor, 1st Unit, 9th Block, Cuizhu Street, High-Tech Zone, Zhengzhou, Henan, China
Technical specifications
| Product Name | 8 inch chassis heating anti corrosion spin coate |
|---|---|
| Product Model | CY-SPC8-CH |
| Powersupply | AC220V, 50Hz |
| Chambermaterial | PTFE |
| Substrate size | Diameter ≤ 8 inches (200mm) |
| Heatingmode | Ceramicheating ring |
| Operatingtemperature | RT-160℃ |
| Rotation speed | 0-8000rpm |
| Speed resolution | 1rpm |
| Operation Mode | 7inch HD LCDtouchscreen |
| Gluedropping mode | Manualglue dispensing, liquid canbe supplied during spin coating |
| Liquid drain pipe and waste liquidtank | PTFE |
| Spin coating curve | Each curvehas 30segments, atotal of 100 curves can be stored |
| Vacuumpump | Oil-lesspump |
| Pumpingspeed | 50 L/min |
| Standard configuration | With 4 vacuum chucks: 10mm, 25mm, 55mm, 100mm (Other specifications can be customized); One oil-free vacuum rotary vane pump |
| Warranty | One-yearlimitedwarrantywithlifetime support (demo before purchase available) |
02Heated Spin Coater
The heating homogenizer mainly uses the principle of centrifugal coating to coat liquid or colloidal materials on silicon, crystals, quartz, ceramics and other substrates to form a film, which has a wide range of applications in the field of material research. The instrument adopts advanced precision motor
- Fax: +86 371 8603 6875
- Add: No. 820, 8th Floor, 1st Unit, 9th Block, Cuizhu Street, High-Tech Zone, Zhengzhou, Henan, China
Technical specifications
| Spin Coater | The spin coater capable to coat liquid or colloidal materials on silicon wafers, crystals, quartz, ceramics and other substrates to form thin films. |
|---|---|
| Model No. | CY-SPC8-CH |
| Supply voltage | AC220V, 50Hz |
| Spin speed | 0~10,000rpm |
| Acceleration | 100~5,000rpm/s |
| Speed resolution | 1rpm |
| Single step time | 3,000s |
| Substrate size | Diameter ≤ 8 inches (200mm) |
| Chamber material | Aluminum alloy |
| Upper cover | PVC (Polyvinyl chloride, for observing the coating state conveniently) |
| Sample stage | Gold-plated, copper plate, with good thermal conductivity |
| vacuum chucks | 4 vacuum chucks: 10mm,25mm.55mm,100mm; |
| Heating mode | Ceramic heating ring |
| Heating temperature | ≤200℃ |
| Temperature control method | AIP intelligent temperature control |
| Operation method | 7 inches HD LCD touch screen |
| Dispensing method | precision syringe pump |
| Coating curve | 5 segments per curve, a total of 5 curves can be stored |
| Pumping port | Φ6mm quick screw interface |
| Overall size | 290mm×365mm×300mm |
| Vacuum pump | Dry mechanical pump, oil-free vacuum rotary vane pump |
| Pumping rate | 1.1L/s |
03PTFE Anti-Corrosion Automatic Spin Coater
Model CY‑SPC12‑PTFE is a swing‑arm automatic spin coater with PTFE chamber, built for 8‑inch and 12‑inch wafer/substrate processing.
- Fax: +86 371 8603 6875
- Add: No. 820, 8th Floor, 1st Unit, 9th Block, Cuizhu Street, High-Tech Zone, Zhengzhou, Henan, China
Technical specifications
| Model | CY‑SPC12‑PTFE |
|---|---|
| Power Supply | AC220V, 50 Hz |
| Applicable Substrates | 8‑inch,12‑inch; aluminum‑alloy vacuum chuck |
| Chamber Material | PTFE |
| Rotation Speed | 0‑5000 rpm |
| Speed Resolution | ±1 rpm |
| Acceleration Range | 100‑2500 rpm/s |
| Max Single‑step Time | 3000 s |
| Time Resolution | 1 s |
| Programming | 100 programs ×100 steps |
| Dispensing Port | Expandable four‑channel automatic dispensing ports |
| Dispensing Function | Multi‑channel automatic dispensing upgradable |
| Glue‑dispensing Mode | Automatic |
| Operation | Full‑color LCD touch‑screen system |
| Overall Dimension | 650 mm × 680 mm × 620 mm |
| Net Weight | 35 KG |
04Desktop Programmable Dip Coater
Desktop Program control dip coater machine is a kind of equipment widely used in the research of thin film in scientific laboratory research.
- Fax: +86 371 8603 6875
- Add: No. 820, 8th Floor, 1st Unit, 9th Block, Cuizhu Street, High-Tech Zone, Zhengzhou, Henan, China
Technical specifications
| Dipping/Pulling | Dipping/Pulling Speed: 1-200 mm/minute Adjustable via digital panel Travel Distance: 0-200mm Adjustable via digital panel |
|---|---|
| Voltage | AC 110V/220V |
| Sample holder | Two screw sample clips are installed in the sample holder to carry the samples sliding up and down through one precision ball bear guide rod. |
| Beaker Holder | The beaker which contains the coating material (coating solution) will be placed into the slot of the beaker holder |
| Solution container | One 150ml beaker is included |
| Max. Sample size | 50mm(L) x 25mm(W) x 2.5mm(T) |
| Sample weight | Less than 250g |
| Dipping/Pulling Motor | DC Stepping motor |
| Product dimension | 320mm(L) x 255mm(W) x 540mm(H) |
| Certificate | One year limited with lifetime support |
| Net Weight | 45 lbs |
| Item # | Description · Qty |
|---|---|
| 1 | Desktop Dip Coater · 1 |
| 2 | Screw Sample Holder · 1 |
| 3 | Beaker Holder with Guide Pillar · 1 |
| 4 | 150mL Beaker · 1 |
05Fully Automatic Heated Spin Coater
Fully Automatic Heating Spin Coater Liquid or colloidal materials can be coated on silicon wafers, crystals, quartz, ceramics and other substrates to form thin films, mainly used in photoresist spin coating, biological medium production, sol-gel method for polymer film production, etc
- Fax: +86 371 8603 6875
- Add: No. 820, 8th Floor, 1st Unit, 9th Block, Cuizhu Street, High-Tech Zone, Zhengzhou, Henan, China
Technical specifications
| Product Name | Fully Automatic Heating Spin Coater |
|---|---|
| Model | CY-SPC8-SS |
| Power supply | AC220V 50Hz |
| Wafer specifications | Max. 8inch standard wafer |
| Chamber | Chamber capacity: 5L Stainless steel material |
| Spinning | Spinning speed: 0~5000rpm Acceleration: 100~5000rpm/s Speed resolution: 1rpm Program: can store 30 curves, each curve has 100 steps |
| Automatic dispensing | Dispensing arm Pipelines: three lines and spray nozzles Compatible with viscous liquid (1000-1500 cps) |
| Manual dispensing | Lid can be opened for manual dispensing |
| Edge bead removal | Pipeline: one line Flow range: 5~50ml/min Liquid flow monitoring: float flowmeter, with flow alarm Edge removal range: 1~5mm±0.3mm |
| Back side washing | Pipeline: one line Flow range: 20~200ml/min Liquid flow monitoring: float flowmeter, with flow alarm |
| Heating | Heating method: infrared heating Heating temperature: ≤150℃ Temperature control method: AIP intelligent temperature control |
| Chuck | Wafer fixation method: vacuum suction chuck, for 8inch wafer Chuck material: aluminium alloy |
| Vacuum pump | Oil-less pump |
| Operation method | Touch screen |
06Four-Nozzle Ultrasonic Spin Coater
The Four-Nozzle Ultrasonic Spin Coater is a high-end, high-precision semiconductor and micro-nano processing equipment used for coating photoresist or other functional liquids onto substrates. It represents the latest development direction in spin coating technology and is particularly suitable for coating complex structures and non-planar substrates.
- Fax: +86 371 8603 6875
- Add: No. 820, 8th Floor, 1st Unit, 9th Block, Cuizhu Street, High-Tech Zone, Zhengzhou, Henan, China
Technical specifications
| Product Name | Four-Nozzle Ultrasonic Spinning Machine |
|---|---|
| Model | CY-300SS-4 |
| Spin Coater | Wafer Size · 12-inch |
| Chamber Material | PTFE |
| Heating Temperature | ≤200°C (can be used for one hour) |
| Temperature Control Accuracy | +/- 0.1°C |
| Heating Method | Infrared Heating Element |
| Coating Duration | 0-60 sec (Adjustable) |
| Coating Thickness | ≤100nm (Depends on your process) |
| Rotation Speed | 30~6000rpm adjustable |
| Rotation Acceleration | 30~2000rpm/s adjustable |
| Speed Resolution | 1rpm |
| Max. Single Spin Coating Time | 3000s |
| Vacuum Chucks | One 2.5x2.5cm, One 10x10cm |
| Temperature Control Method | AIP Intelligent Temperature Control |
| Operation Method | 7-inch HD LCD Touch Screen |
| Control Panel | HD Touch Screen PLC. The control panel can set spray, dehydration bake, and temperature control programs. |
| Special Pure Mechanical Chucks for Dispenser | One 12-inch (Requires extra customization); One 6-inch (Requires extra customization) |
| Oil-free Vacuum Pump | Model: AP-2000V Power: 0.55kw Minimum Vacuum: -700mmHg; -92Kpa Max. Air Flow: 200L/min; 12M³/h Weight: 10kg |
| Overall Dimensions | 1200x1000x1050mm |
| Ultrasonic System | Quantity · 4 |
| Atomizer Head Material | Titanium Alloy |
| Frequency | 120kHz |
| Power | 130W |
| Flow Rate | 0.01-20ml/min |
| Droplet Diameter | 20-25µm |
| Spray Width | 2-20mm |
| Atomizer Head Type | Tapered |
| Syringe Pump | Flow Rate Range · 50mL/min |
| Syringe Pump Specification | 10ml Accuracy +/- 0.01 mL |
| Syringe Pump Specification | 100mL Accuracy +/- 0.01 mL |
| Linear Speed Range | 5µm/min-65mm/min |
| Linear Speed Adjustment Resolution | 5µm/min |
| Max. Stroke | 140mm |
| Stroke Resolution | 0.156µm |
| Rated Linear Thrust | >90N |
| Flow Meter | Controlled Gas Types · 2 types |
| Gas Flow Rate | 16-160mL/min |
07Swing-Arm Spin Coater for Silicon Wafers
The swing arm spin coater mainly uses the centrifugal coating principle to coat liquid or colloidal materials on silicon wafers, crystals, quartz, ceramics and other substrates to form a thin film. This process is widely used in the field of materials research
- Fax: +86 371 8603 6875
- Add: No. 820, 8th Floor, 1st Unit, 9th Block, Cuizhu Street, High-Tech Zone, Zhengzhou, Henan, China
Technical specifications
| Product name | swing arm spin coater |
|---|---|
| Product model | CY-SPC8-BB-PP |
| Maximum speed | 10000 RPM |
| Speed resolution | 1 RPM |
| Maximum rotation time | 3000 S |
| Spin time resolution | 1 S |
| Maximum acceleration | 5000RPM/S |
| Liquid distribution | 3 peristaltic pumps, flow range 0.008ml/min-83.5ml/min |
| Swing arm speed | 0-30°/S |
| Cavity size | Inner diameter 260mm |
| Dimensions | 310mm(W)x400mm(D)x250mm(H) |
| Weight | 20kg |
| Power input | AC220V 50/60Hz |
| Evacuation rate | 50L/min |
| Vacuum interface | Φ6mm Quick-twist connector |
0812-inch PTFE Chamber Spin Coater
spin coater is with vacuum chuck designed for easy and quick coating via sol-gel for wafers up to 12" diameter. This spin coater adopts advanced precision motor
- Fax: +86 371 8603 6875
- Add: No. 820, 8th Floor, 1st Unit, 9th Block, Cuizhu Street, High-Tech Zone, Zhengzhou, Henan, China
Technical specifications
| Input power supply | AC220V, 50Hz |
|---|---|
| Chamber material | PTFE |
| Substrate size | Diameter≤12 inches (~300mm) |
| Spin speed | 0-5000rpm |
| Acceleration | 100-5000rpm/s |
| Speed resolution | 1rpm |
| Single step time | 3000s |
| Operation method | 7 inches HD LCD touch screen |
| Dispensing method | Manual dispensing |
| Coating curve | Each curve has 5 segments, can store 5 curves in total |
| Vacuum chuck | Yes, includes |
| Vacuum pump | Oil-less pump |
| Pumping speed | 50 L/min |
| Total weight | ~40kg |
098-inch Acrylic Chamber Photoresist Spin Coater
The spin coater can coat liquid or colloidal materials on silicon wafers, crystals, quartz, ceramics and other substrates to form a thin film. It is mainly used in the fields of photoresist spin coating, biological culture medium production, and sol-gel method for polymer film production.
- Fax: +86 371 8603 6875
- Add: No. 820, 8th Floor, 1st Unit, 9th Block, Cuizhu Street, High-Tech Zone, Zhengzhou, Henan, China
Technical specifications
| Model | BT-300CA/153Yx-PPS |
|---|---|
| Adaptive pump tube | silicone tube, A-60-F tube, coated tube |
| Optional pump tube sizes | 14#, 16#, 25#, 17#, 18# |
| Motor type | Stepper motor |
| Voltage speed | 220V-300rpm(maximum speed) |
| Flow rate | 0.022~1340ml/min |
| Add | No. 820, 8th Floor, 1st Unit, 9th Block, Cuizhu Street, High-Tech Zone, Zhengzhou, Henan, China |
101000 mm Stainless Steel Photoresist Spin Coater
spin coater is an instrument used to prepare thin films and is widely used in materials science, physics, chemistry and other fields. Its main working principle is to use centrifugal force to evenly coat the glue dripped on the substrate on a high-speed rotating substrate
- Fax: +86 371 8603 6875
- Add: No. 820, 8th Floor, 1st Unit, 9th Block, Cuizhu Street, High-Tech Zone, Zhengzhou, Henan, China
Technical specifications
| Product name | 1000MM spin coater |
|---|---|
| Product model | CY-SPC40-T-SS |
| Supply voltage | AC380V 50H |
| Rated power | 15KW |
| Speed | max1500rpm |
| Cavity size | 1000MM |
| Cavity material | Stainless steel 304 |
| Tray size | 780mm |
| Tray material | Aluminum alloy |
| Control system | Touch screen LCD screen, single-step or multi-step glue spreading operation |
| Glue baking system | Baking temperature max 200℃ |
| Glue dripping system | Multi-point glue dripping, 3-5 drip nozzles, automatic injection |
| Dimensions | 1400*1400*2000 |
| Weight | 1.5T |
11PLC Precision Lab Dip Coater
PLC controlled precision lab dip coater is a Precision Dip Coater for coating samples with size up to 10"×12" from the liquid solution. The ball screw pulling system and 6"×4" Color PLC controller offer smooth, vibration-free travel in both directions. Pulling rate, immersion rate, dwell time, and cycling time is fully programmable. A polypropylene tank is included to hold the liquid solution.
- Material: Polypropylene
- Outside dimension: 360mm(L) x 60mm(W) x 290mm(H)
- Inside dimension: 320mm(L) x 45mm(W) x 280mm(H)
- Fax: +86 371 8603 6875
- Add: No. 820, 8th Floor, 1st Unit, 9th Block, Cuizhu Street, High-Tech Zone, Zhengzhou, Henan, China
Technical specifications
| Working Voltage | 110/220V AC switchable, 50/60 Hz |
|---|---|
| Max. Power Consumption | 20W |
| Maximum Sample Load | 7 kg (15.4 lbs) |
| Standard Panel Size | 310mm(L)×260mm(W)×(3-15)mm(Thickness) Customized tank dimension is available upon request at extra cost |
| Panel Holder | Can hold one or several panels from 3-15mm thickness |
| Touch Screen PLC Dimensions | 6"(L)×4"(W) |
| Insertion Speed | 1 - 200 mm/minute programmable by Touch Screen PLC |
| Withdrawal Speed | 1 - 200 mm/minute programmable by Touch Screen PLC |
| Max. Dry and Dwell time | 999s |
| Max. Stroke | 270mm Measurements are located on both sides of the Panel holder's traveling path for a quick distance measuring. |
| Max. Number of Cycles | 20 |
| Speed Stability | +/-0.05% |
| Immersion Tank | Material: Polypropylene Outside dimension: 360mm(L) x 60mm(W) x 290mm(H) Inside dimension: 320mm(L) x 45mm(W) x 280mm(H) Volume: 4L |
| Product Dimensions | Dip Coater: 460mm(L) x 330mm(W) x 970mm(H) Control Unit: 310mm(L) x 300mm(W) x 130mm(H) |
| Compliance | CE Certified |
| Warranty | One Year limited warranty with lifetime support |
| Net Weight | 18 kg (39.6 lbs) |
No model matches that name.
Same category
Related product lines
Buying in Egypt
Questions about Thin film coaters
Where can I buy a thin film coater in Egypt?
Tiba Scientific supplies Thin film coaters from CY Scientific (China) in Egypt, with installation, user training and maintenance by its own engineers. 11 models are listed on this page.
What is the price of a thin film coater in Egypt?
Prices depend on the model, configuration and accessories, so Tiba Scientific quotes each request. Send the model or the analysis you need on WhatsApp or call 010 0529 9601 for a written quotation.
Does Tiba Scientific install and service CY Scientific instruments?
Yes. Tiba Scientific installs and commissions the CY Scientific instruments it supplies, trains the users, and provides calibration, preventive maintenance and repairs after handover.
Not listed